Blue Ridge Mountain

Name = dany 
E-mail = terrellhi5@aol.com
Phone # = 919 414 3757 
500cc mod pulling tractor on 82 series frame built rear end all alum rims 2 spare parts motor to go with it,1000cc  cbr rail 9 ford rear 3 speed trans ford also new tire and rims extra set carbs,18hp kohler command vtwin built built rear end new tires alum rims puck clutch set up fan etc... all tractor are ready to pull i have weight but only go with them if at least 2 of them are sold togather also have a 24 enclosed trailer new a/c good and cold 5500 watts gen on front cabinets,lights,aircompressure real hose set up ready to go to track with sway bar set up for any info or to see tractors call me is best danny 919 414 3757 (will not sale trailer unless  i sale 2 of the tractors first) will make a package deal 3 tractors and trailer 2 tractors and trailer money talks bs can keep walking cash sales only no exceptions 919 414 3757 danny

Exhaust Flange Kits for Sale   Fits 12 and 14 HP K series Kohler engines.

Kits are $50  do it yourself, or $75 installed.

540-334-2577 ask for Mark before 9:30 pm

or email bubbaz812@hotmail.com

 

 

 Greg Edwards
 E-mail = sdrawde@ntelos.net
 Phone # = 434-996-5549
 The "PointSlayer" is here!! NEW Kohler K series single cylinder electronic ignition system!! The "PointSlayer" is a professionally designed production made piece made just for Kohler single cylinder K-series engines. It will work with any engine from Stock to Super Stock! Bolts in the same spot that your old points setup now occupies. Get rid of your points, points plate, and condenser and bolt on this fully adjustable unit. No more points to get out of adjustment, no more worn points, no more power robbing condenser!! Uses the factory Kohler K-series points cover. Super easy two-wire hookup. Comes with full instructions. Installed in minutes; not hours. No special equipment needed. Will not interfere with any other parts on your engine....PERIOD!! All you need is a cam with the points lobe in the factory position. Will not work on external PTO-end mounted points lobe systems. Will work with any Vogel cam or anyone's cam that has a cam lobe in the factory position. Will work with your existing Bosch Super Blue coil or factory Kohler coil. You are losing precious spark power with a condenser and points. If you use 2 condensers then you are throwing away even more spark power. Power that you will not lose with this system. In fact, I guarantee it to produce a hotter and more accurate spark than any points and condenser setup. Introductory offer: $85 delivered to your doorstep and I will pay a one-time $10 "contingency payback fee" for your first documented win with the system. In other words, I will mail you a check for $10 for your first win using this system. This is ONLY for your first win. WIN MONEY BACK FOR USING MY SYSTEM! This "contingency payback fee" is an introductory offer that will expire. Get yours today. I will also be offering a Kohler Command v-twin ignition that bolts on in place of your factory Command ignition coils and you can use your factory flywheel and magnet or the MSC or Lakota billet adjustable flywheel with a factory or aftermarket magnet. Again, this system does not interfere with any factory or aftermarket components. This is a BOLT-ON system. We have prototypes ready to bolt on. Production will begin soon. More details later. We will also be offering some special single cylinder and vtwin coils. These will be USA made coils that will meet and/or exceed the Bosch Super Blue coil specifications without the hassle of pricing changing due to the value of the US Dollar vs. the Euro Dollar since it is made here and not in Germany or Brazil like the Bosch. We sell the Bosch coils, too. We have over 200 of them in stock. $35 each plus shipping. Call or email today for more info.

 Brandon Bayse 
E-mail = Gowgerpullin08@cox.net
 Phone # = 540-265-3558
 this is a 1973 cub cadet 108 for sale i am asking $1500 obo, with 320lb. of jd weights.

comlete restoration! new paint, rebuilt 10 hp bored .010, new rearend.

For Sale,   one pair of 30 mm fine spline axles for sale

$80 cash          ask for Mark   540-334-2577 before 9:00 pm please

can bring to Lexington

For Sale. 582 Cub Cadet pulling tractor- AKA International SS! Stockaltered 48 cu. in. Kohler engine built within Hillard V-twin rules. Roller cam & lifters, forged pistons,billet rods,ported & polished. Transmission has Midwest components, forks, gears. Hardened ring gear & pinion & top shaft. 2 over drive gear sets. Hydrastat carrier & axles. 4 puck clutch. Almost new 26x12x12 pitbull tires. Tri rib front tires. Functional Hyper charger air cleaner. Over 200 lbs of weights.I've built several championship tractors for myself and others. Reason for selling! Too many irons in the fire! You cannot build the same tractor for the price ready to go! $5500 Serios Inquiries only.

                                                                          Charlie Grimmett  Clayton,NC

                                                                           919-320-4489 cell

                                                                           919-359-1909 home

---

Brian Welch
 E-mail = truckpuller47@yahoo.com
 
I have a brand new midwest super cub 1.2" recast gas carb for sale paid $275 asking $220

David Matthews
- E-mail = dmatthews@yadtel.net
 Phone # = 336-699-2760
 For Sale Nice Hot Stock Tractor Called Shotgun 16 H.P. Kohler ,

Fiberglass Hood and nose Comes with Weights.

Tractor is a very competive tractor many wins in Virgina and North Carolina.

 Lewis Housman
 E-mail = tlhousman@hotmail.com
 Phone # = 540-287-4706
 Wanted: Complete 10-Hp Kohler
engine for a wide-frame cub.  Any help appreciated.  Best to contact
at tlhousman@hotmail.com.

 danny
 E-mail = terrellhi5@aol.com
 Phone # = 919 414 3757 
go to brain miller web site
look for my ad on the pulling tractors and  enclosed trailer, ford
  dually etc for sale thanks danny of nc

E-mail = sdrawde@ntelos.net
 Phone #  434-996-5549

 Complete Cub Cadet 1100 minus the engine   $125.

Also, other odds and ends Cub Cadet stuff.

 thanks,

Greg Edwards

 Danny Terrellhi
 E-mail = terrellhi5@aol.com
 Phone # = 919 414 3757 
2 complete 25kohler command ,
2 16 k series, 2 12k series,14 blocks ,2 3 speed rear ends,1 3 speed
with power take off on back,2 20 kohler commands, 1282 frame sides
etc....,20 command heads, flywheels command andd k series,carbs command and
k series 26 30, 2 1250 frames,1 c165 h/l wheelhorse,1 c120 automatic
with mower,engine etc..., axle housings alum and cast, fine spline
axles,coarse spline,carriers, looking something call me is best danny 919 414
3757 thanks

I have a complete K321QS Kohler wide base gear start engine to trade for a complete narrow base gear start engine to fit cub cadet k321AQS. Like an engine off a 1450 Cub Cadet. I will deliver up to 100 miles from Roanoke, VA. I can email pictures. please call before 9:00 pm. 540-334-2577, or email bubbaz812@hotmail.com

 

I have the frame,hood, nose piece, dash,differential and complete hydraulics from a 149 Cub Cadet. 

   Price: make offer.    call 540-334-2577 before 9:00 pm ask for Mark

email bubbaz812@hotmail.com  .

Also I have a hood in very good condition for a model 71 Cub Cadet  $20

 

 Greg Edwards
 E-mail = sdrawde@ntelos.net
 Phone #  434-996-5549
 Kohler #26 and #30 carburetor
rebuilding service. Rebuilt to factory stock specs. Years of
experience. I will rebuild your usable core or I can supply a core. Call or
email for a quote.

steve s
 E-mail = thefuzz65@yahoo.com
 Phone # = 937-205-2175
 new! set of fiberglass round
fenders I bought these from amstutz intallmage and decided to use a
difrent style paid $100.00 for them i'll take $80.00 and i'll pay the
shipping to you..

INDIGO  SIGNS
E-mail = mary@onlyindigo.com
 Phone # = 540-765-8289  /  540-489-8400
 COME SEE MARY TURNER AT
INDIGO SIGNS AT 1455 FRANKLIN STREET ROCKY MOUNT VA 24151 FOR ALL YOUR
CUSTOM SIGN WORK. MARY HOLDS DEGREES IN ART AND IS NOVICE BIRD WATCHER AND
LOVER. INDIGO SIGNS CAN HANDLE FROM THE SMALLEST JOBS LIKE BUSINESS
CARDS TO FULL SIZE DECALS LIKE WHAT'S ON BUCK MITCHELL'S ENCLOSED TRAILER.
THEY ARE ABLE TO SCAN AND PRODUCE MOST ANYTHING A PERSON WOULD WANT OR
NEED. PLEASE CHECK WITH MARY FOR FREE ADVICE AND PRICING ON ALL YOUR SIGN
OR DECAL NEEDS.   THANKS   MARY TURNER {OWNER}

 Mike
- E-mail = Atvrider82686@aol.com
 Phone # = 7032979177
 12hp kohler motor, .030 bore
strong running motor.  Needs a Carb, Set of points and a started.
  Asking $150.00

 Gordon Shelton
 E-mail = Gordie691@aol.com
 
  does any oneknow where any
  6x3.25 Aluminum Front Wheels and  Tri-rib Tires 3.5x6

Mike Mentzer
 E-mail = Atvrider82686@aol.com
 Phone # = 7032979177
Set of 26x12x12 firestones,
cut, still in good condition.  Asking $100obo

J & S Enterprises
E-mail = jands81@mchsi.com
 Phone # = 217-968-7348
 Checkout our online catalog for Cepeks - Lawntecs - Douglas Wheels - Gears - Throttle Pedals and
alot of other quality pulling products.
http://members.aol.com/tractorpulling/j-s/catalog.htm
or Phone 217-968-7348  Thanks, Jack - J & S Enterprises

Keith Shelton
E-mail = kws613@aol.com
Phone #  1-540-295-4566
wanted:  tires/wheels
  26x12x12 bar tire, alum. 12x12 wheels preferred

john england
E-mail = trouble7997@aol.com

 Phone #  5403271002
 2 sets of firestone pulling
tires 31X15.5-15 used about one season 12pulls only cut once still have
full lug $270 a set if serious please email or call for pics
trouble9779@aol.com or 5403271002 will ship but buyer pays shipping or will
deliver up to 100 miles rad of norhtern va and for cost of fuel

Skip Gurganus
E-mail = skipispulling@yahoo.com
 Phone #  252-217-5160 or 252-792-6942
Mid-Atlantic Performance, LLC 
selling a full line of garden tractor parts and accessories.  We have
Lawntec tires,Douglas wheels, True Gear trans gears, all the engine
parts from stock to Super Stock, Kohler dealer and more. WEbsite
mid-atlanticperformance.net. In the process of being updated right now. Some
parts and prices may vary.

Good Pulling!!
Skip

38 inch mower deck off of model 71 Cub Cadet   good condition. I think it is the original one that came on the tractor. It has the cast ends. Also included is the hangar rack and all the lift mechanism, handle and all.....  $100   call before 9:00 pm  540-334-2577 or email bubbaz812@hotmail.com

 

 

01 - Name = ED WILLIAMS
02 - E-mail = TRACTORSBYED@AOL.COM
03 - Phone # = 845 658 9219
 PLEASE VIEW
  http:tractorsbyed.tripod.com   e mail all offers